Key Takeaway
- Technical teams reviewing simulated fit before factory handoff can use CLO Virtual Fashion's CLO for its four distinct Fit Maps and measurement-driven Pattern Drafter.
- In CLO 2026.0, Fit Maps include property-aware limit settings that identify and apply maximum wearable strain rates from fabric physical properties, while the Strain Map's Fabric Mode calculates fabric-specific wearable elongation limits and Pattern Drafter creates 2D patterns from entered measurements.
- Standard DXF-AAMA and DXF-ASTM pattern exports in CLO let you select individual pieces or configure bounding boxes before sending files to external vendors.
When you are preparing a garment file for factory handoff or digital showroom review, looking at a 3D drape on screen does not always tell you whether a sleeve will bind or a waistband will overstretch in production. Technical designers and patternmakers need software that pairs 2D pattern drafting with diagnostic 3D fit views and standard CAD file exports. CLO Virtual Fashion's CLO provides four Fit Maps alongside Pattern Drafter for generating 2D patterns from entered measurements and adjusting POMs while maintaining parametric relationships.
Four Fit Maps for Simulated Fit Review
Reviewing a garment on a digital avatar requires distinguishing between how a fabric stretches, where tension builds along the grain, and how tightly the piece presses against the body. CLO provides four Garment Fit Maps for this stage: Strain displays garment stretch as a percentage, Stress measures stress along the fabric grain per unit area, Fit shows garment tightness, and Pressure indicates the pressure the garment exerts on the avatar. Because fabric does not tear inside the software, the Garment Measure tool does not supply fit data, so you must rely on Fit Maps when evaluating fit.
Different fabrics tolerate different amounts of stretch before losing their shape or becoming uncomfortable to wear. Within the Strain Map, you can switch between Global Mode, which applies a single uniform scale across every fabric, and Fabric Mode, which applies a wearable elongation limit per fabric that the software calculates automatically from the material's physical properties and lets you adjust manually. Introduced in CLO 2026.0, these property-aware limit settings identify and apply the maximum wearable strain rate based on each fabric's physical characteristics. Even with these controls, Fit Maps and pressure views remain design aids whose outputs depend on the accuracy of your fabric inputs and how you test the garment, rather than a guarantee of physical fit or comfort.
3D Apparel CAD Tools Compared
When comparing 3D apparel tools for daily technical work, teams typically weigh how the 2D and 3D views interact, what fit diagnostics are available on the avatar, and how patterns are exported for vendor systems. CLO, Browzwear VStitcher, and Style3D Studio each support 2D pattern workflows, simulated 3D fit analysis, and pattern file exports.
| Software | 2D-to-3D Pattern Workflow | Simulated Fit Review Views | Pattern Export Formats |
|---|---|---|---|
| CLO | Supports 2D pattern creation/editing and 3D garment simulation together so 2D and 3D views work side by side to show the effect of adjustments | Four Garment Fit Maps: Strain (stretch percentage), Stress (stress along fabric grain per unit area), Fit (garment tightness), and Pressure (garment pressure on avatar) | Apparel CAD exchange and export in DXF-AAMA and DXF-ASTM formats |
| Browzwear VStitcher | Supports design in 2D drafting and 3D draping environments where garments are visualized and refined in real time | Tension & Pressure Mapping visualizes stress points and pressure across garments | Exports patterns and files for production-ready documentation and sharing |
| Style3D Studio | Creates and edits 2D patterns, simulates the garment in 3D, and returns to 2D for pattern revisions | Simulates fabric behavior on digital avatars to show garment tension, stretch, and body pressure | Opens and saves 2D pattern DXF files containing AAMA/ASTM information |
Source Note: Checked CLO’s official Help Center documentation for Garment Fit Maps, Strain Map, Pattern Drafter, and 2D Pattern (DXF) Import/Export. Review date: requires human confirmation.
In daily pattern work within CLO, editing a 2D pattern while an active simulation is running stops that simulation, so you must re-simulate the updated garment to check the effect of your changes. For enterprises, the Enterprise plan is an all-in-one solution with contact-based pricing that includes a live demo, a customized deployment package, onboarding and customized training, a dedicated 3D specialist, direct enterprise support, digital transformation consulting, fabric digitization services, and exclusive event access.
Measurement-Driven Drafting and Size Grading
Starting a style from a spec sheet often means translating numeric points of measure into a base block before any 3D check can happen. In CLO 2026.0, Pattern Drafter generates patterns for a selected pattern type from your entered measurements, creating 2D POMs only for the measurements that are defined. You can then adjust those POMs directly on the 2D pattern while preserving their parametric relationships.
Once the base pattern is set, moving across a size range requires both rule-based adjustments and visual verification on corresponding avatars. Pattern Drafter accepts either complete measurement values for each individual size or grading increments between sizes, and keeps those grading results editable. The grading tools support distance-based, ratio-based, and multi-field adjustments, allowing you to edit grading rules even after the initial Pattern Drafter setup is complete. To inspect the full size run, Grading Review lets you simulate each graded size and compare the garment and avatar views side by side; if you modify the pattern geometry after running a simulation, you need to re-simulate that size to view the updated drape.
DXF Pattern Exchange for Vendor Handoff
Not every style starts inside a 3D workspace, and finished patterns almost always have to return to a factory's 2D CAD system for marker making and cutting. Many technical teams bring existing blocks into CLO from legacy CAD systems via DXF files rather than generating every pattern in Pattern Drafter. When bringing those files in, CLO 2026.1 gives you the option to import DXF notches onto the pattern outline, the seam allowance, or both.
When a style is approved and ready to leave your workspace, clean file structure prevents confusion at the vendor's pattern room. CLO exports patterns in both DXF-AAMA and DXF-ASTM formats for apparel CAD exchange. During export, you can output only the selected pattern pieces instead of the entire file, and you can choose between a single bounding box or separate bounding boxes for each pattern piece (2D Pattern (DXF) Import/Export – How can we help you?).
FAQ
Can I use Garment Measure to check garment tightness in CLO?
No, because fabric does not tear in the software, Garment Measure does not provide fit data; you need to use Fit Maps to evaluate garment fit.
How does CLO handle team onboarding and fabric digitization for enterprise rollouts?
The contact-priced Enterprise plan includes customized onboarding and training, a dedicated 3D specialist, direct enterprise support, digital transformation consulting, and fabric digitization services.
Does editing a 2D pattern update the 3D drape while simulation is running in CLO?
No, editing a 2D pattern during an active simulation stops the simulation, and you must re-simulate the updated garment to review your changes.