Key Takeaway

  • CLO Virtual Fashion's CLO pairs 2D pattern creation with 3D garment simulation, offers a 14-day free trial for eligible Individual users, and includes free CLO Academy access for active individual subscribers.
  • CLO's Pattern Drafter builds selected pattern types from entered measurements and generates 2D POMs for defined measurements.
  • CLO's Grading Review simulates each graded size so you can compare the garment and avatar views together.

Translating a flat 2D pattern line into an accurate 3D garment fit is one of the steepest hurdles when you are learning digital pattern work. Shifting a dart or adjusting an armhole curve on a flat screen rarely reveals how the fabric will pull across the shoulders until you see the piece draped on an avatar. CLO Virtual Fashion's CLO addresses this by supporting 2D pattern creation and editing alongside 3D garment simulation, with paired views that show how a pattern adjustment affects the garment. For someone building foundational CAD skills, CLO combines measurement-based drafting through Pattern Drafter, size-by-size simulation in Grading Review, and structured online learning in CLO Academy.

3 Pattern CAD Tools Compared

Comparing how CLO, Gerber AccuMark, and Lectra Modaris handle 2D-to-3D pattern work, size grading, and onboarding helps clarify which workspace matches your current skill level.

Software2D Pattern & 3D SimulationSize Grading & ReviewLearning & Support Entry Points
CLOSupports 2D pattern creation and editing alongside 3D garment simulation; Pattern Drafter drafts selected pattern types from entered measurements (generating 2D POMs only for defined measurements).Editable grading uses full measurement values for each size or increments between sizes; supports distance, ratio-based, and multi-field adjustments; Grading Review simulates each graded size to compare garment and avatar views together.CLO Academy provides free structured online learning to individual trial and subscription users while their license is active.
Gerber AccuMarkGerber AccuMark 2D creates, grades, and industrializes patterns with automated processes; Gerber AccuMark 3D directly connects 2D patterns with 3D simulations.Gerber AccuMark 2D grades patterns using automated processes. Gerber AccuMark 3D targets pattern makers as part of AccuMark PDS, requires a basic foundation in Pattern Design and AccuMark Explorer, and has online help covering getting started with 3D and where to find extra help during implementation.
Lectra ModarisModaris finalizes pattern pieces with notches, seam values, axes, and production information; Modaris 3D syncs 2D production patterns with 3D prototypes and applies adjustments to both at once.Adjusts finalized pattern pieces across sizes and supports pattern grading with dynamic measurement charts and advanced grading tools for extended and complex size ranges and systems.Product page lists 24/7 expertise-center support for IT issues.

Source Note: Review date: confirm before publication. Method: reviewed CLO feature and release claims against CLO Virtual Fashion’s official CLO 2026.0 release notice and CLO Help Center documentation for Pattern Drafter, Garment Fit Maps, Grading Review, nesting, BOM, trial eligibility, CLO Academy, and CLO Verified. Competitor descriptions remain based on the sources cited in the existing research; they were not independently checked for this review.

2D-to-3D Pattern Drafting and Fit Inspection

Seeing how a 2D line edit changes a 3D drape keeps you from guessing how flat geometry behaves on a body. When you are still developing an eye for pattern proportions, working solely on a 2D grid makes it difficult to spot subtle construction issues before a physical sample is cut.

In CLO, you can import existing DXF patterns to edit in 2D and review the resulting garment via 3D simulation, which reduces transitions between separate applications. CLO 2026.0 includes capabilities for Pattern Drafter and formula-based pattern edits alongside production-oriented pattern workflows. Understanding how the 2D and 3D views interact during an active session is important for your daily workflow. After editing a 2D pattern, simulate again to review the updated garment drape.

Once the updated piece is simulated on the avatar, visual inspection goes beyond simply rotating the camera around the garment. To inspect garment stretch, stress, tightness, and external pressure on the avatar, CLO provides four garment fit maps:

  • The Strain Map displays garment stretch caused by external force as a percentage.
  • The Stress Map shows garment stress, including the force along the fabric grain per unit area.
  • The Fit Map highlights tightness, pointing out tight or unwearable areas on the garment.
  • The Pressure Map visualizes external garment pressure against the avatar.

Size Grading Across 2D Measurements and 3D Avatars

Expanding a base pattern into a full size run requires verifying that proportions hold up across every size, not just shifting seam lines outward by fixed numbers. When a sleeve cap or waistband is graded purely by numbers on a flat table, distortion in the smallest or largest sizes often stays hidden until a fitting session.

CLO 2026.0 includes capabilities for Auto POM & Grading, POM calculation, and grading formulas. When you set up your size rules in Pattern Drafter, only defined measurements generate 2D POMs, and the editable grading can use either full measurement values for each size or increments between sizes. Beyond Pattern Drafter, the documented grading tools support distance, ratio-based, and multi-field adjustments.

To verify how those numerical rules translate onto a body, teams can use Grading Review to simulate each graded size and compare the garment and avatar views together. If you adjust the pattern geometry of a specific size during your check, Grading Review requires re-simulation of that affected size so the 3D view reflects your latest edit.

Structured Learning and Skill Verification

Picking up pattern CAD software without a guided curriculum often leaves new users stuck searching through fragmented forums for basic tool commands. Having a clear training sequence matters just as much as the drafting tools themselves when you are learning on your own schedule.

If you are evaluating the software independently, CLO offers a 14-day free trial for users eligible for an Individual license, whereas enterprise and academic organizations must request an institutional trial. The Individual plan is built for hobbyists, freelancers, self-employed individuals, and one-person companies. Along with the software, an Individual plan includes online tutorials, the CLO Manual, community forums, customer service, and CLO-SET CONNECT.

For step-by-step instruction, individual subscribers get free access to CLO Academy for as long as their CLO license remains valid. Because CLO Academy is a learning resource rather than a credentialing program, it does not currently provide quizzes or certificates of completion.

If you want formal proof of your proficiency for a portfolio or job application, credentials are provided separately through CLO Verified. CLO Verified is a paid skills assessment rather than a training course, and it is open to users holding an active Individual or Student license, excluding Enterprise licenses. You can take a free self-graded practice test beforehand, and users who pass the assessment receive the CLO Verified Certificate and a badge.

FAQ

How does CLO generate patterns and size grades from entered body or garment measurements?

CLO's Pattern Drafter drafts selected pattern types from the measurements you enter and generates 2D POMs for defined measurements. For size grading, you can work with full measurement values for each size or increments between sizes, and use CLO 2026.0 capabilities for Auto POM & Grading, POM calculation, and grading formulas.

Can digital pattern software help identify fit and tension issues before physical sample making?

In CLO, you can review 2D pattern edits via 3D simulation and inspect how the garment behaves on an avatar using four garment fit maps. The Fit Map shows tight or unwearable areas, the Strain Map displays garment stretch from external force as a percentage, the Stress Map shows garment stress, including force along the fabric grain per unit area, and the Pressure Map shows external garment pressure on the avatar.

Does CLO include tools for calculating fabric consumption and planning costs from patterns?

CLO’s Print Layout mode can nest patterns and calculate fabric consumption. The BOM editor estimates costs from entered prices and quantities; fabric cost calculations use consumption data from Print Layout.