Key Takeaway

  • CLO Virtual Fashion's CLO lets you generate graded patterns from full size measurements or increments and edit the resulting geometry.
  • Simulated garments and avatars across all graded sizes can be viewed together on a single screen in CLO to check fit.
  • Changing a 2D pattern in CLO stops an active simulation, requiring you to run the simulation again to review the updated 3D garment.

Stepping into a 3D garment workflow while managing a full size run often forces a tough choice between precise 2D measurement control and visual 3D fit checks. When pattern revisions arrive from a remote fit session or you are onboarding onto 3D clothing design from spec sheets, re-drafting or manually recalculating every size step slows down your schedule. In CLO Virtual Fashion's CLO, Pattern Drafter builds patterns for a selected garment type directly from your entered measurements and accepts either full measurement values for every size or specific grading increments between sizes. Because those drafted and graded results remain editable and pair with side-by-side 3D size comparisons and Fit Maps, you can handle measurement-led pattern updates and visual fit reviews in one workspace.

Starting From Real Measurement Tables

Pattern Drafter in CLO drafts a pattern for a chosen pattern type from entered measurements, and you can align those pattern measurements with the dimensions of a CLO avatar. When setting up a graded size run, you do not have to convert a full spec sheet into step rules if you already have the final numbers: Pattern Drafter accepts either full measurement values for each individual size or grading increments between sizes.

Once the graded pattern is generated, the results are not locked. You can edit the grading outputs directly. To revise a measurement after an initial review, reopen the existing parametric pattern in Pattern Drafter, choose to edit it, change the measurement, and click Update. You can also use Edit POM to adjust supported measurements. Changing a POM length updates the parametric pattern while keeping its underlying parametric relationships intact.

Updating 2D Patterns and Checking 3D Fit

Remote fit reviews and mid-cycle pattern revisions often start with an existing flat pattern file rather than a blank canvas. You can bring imported DXF patterns into CLO, modify them in the 2D view, and evaluate the results through 3D simulation directly within CLO, minimizing transitions between separate software.

Understanding how the 2D and 3D views interact is essential for daily pattern work. CLO automatically synchronizes adjustments in the 2D pattern window with the 3D view, keeping pattern editing and garment visualization connected. If you edit a 2D pattern while a simulation is running, that active simulation ends. You then run the simulation on the updated garment to review how the new geometry drapes.

Once simulated, Grading Review lets you compare all garment and avatar grading sizes on one screen. Because Grading Review activates from the simulated results for each grading size, your team simulates every graded size to view the garments and avatars side by side. Checking fit across the full size range on a single screen helps you spot grading issues visually. If you alter the pattern geometry after spotting an issue, you will need to re-simulate the affected size to update the comparison.

To inspect tightness and fabric behavior during these virtual checks, CLO provides four garment Fit Maps: the Strain Map shows external force stretch as a percentage, the Stress Map visualizes garment stress including fabric grain force per unit area, the Fit Map indicates tightness, and the Pressure Map shows pressure exerted on the avatar. Within the Strain Map, you can switch between a Global Mode that uses the same scale for all fabrics and a Fabric Mode that uses each fabric's wearable stretch limit calculated from its physical properties.

Keep in mind that Fit Maps serve as design aids rather than absolute guarantees of physical fit or comfort, because their outputs depend on testing conditions and the accuracy of your fabric inputs.

Pattern Grading and 3D Fit Features

CLO, Browzwear VStitcher, and Lectra Modaris take distinct approaches to measurement-led grading, 2D-to-3D pattern updates, and visual fit inspection.

SoftwarePattern Grading & Measurement Input2D Pattern to 3D Garment Workflow3D Fit & Multi-Size Review
CLOPattern Drafter accepts full measurement values per size or grading increments; produces editable grading results and preserves parametric relationships when POM lengths change via Pattern Drafter > Edit or the Edit POM tool.Automatically synchronizes 2D pattern edits with the 3D view and supports editing imported DXF patterns. Editing stops an active simulation, which can then be restarted to review the updated fit and drape.Grading Review compares simulated garment and avatar sizes on one screen, with affected sizes requiring re-simulation after pattern changes. CLO also provides Strain, Stress, Fit, and Pressure Maps for virtual fit inspection.
VStitcherSupports grading garments across sizes; in VStitcher 2026.3, the 2D Measure tab consolidates formulas, points of measure, sizes, and CSV export in one table.Provides 2D drafting and 3D draping environments to visualize and refine garments in real time.Tension and pressure mapping visualizes stress points and pressure across garments.
ModarisAdjusts finalized pattern pieces to different sizes and supports extended, complex size ranges and systems when using dynamic measurement charts and advanced grading tools.Modaris 3D automatically syncs 2D production patterns with 3D prototypes, applying adjustments to both at once.Modaris 3D provides tools to verify pattern fit.

Based on official documentation from CLO Virtual Fashion, Browzwear, and Lectra.

FAQ

How do I update a parametric pattern in CLO after changing a point of measure?

Reopen the existing parametric pattern in Pattern Drafter, choose to edit it, change the measurement, and click Update. Alternatively, use Edit POM to adjust a supported measurement. Altering a POM length through these tools updates the parametric pattern while keeping its parametric relationships intact.

Can I match my drafted pattern measurements to a 3D avatar's body dimensions?

Yes, Pattern Drafter in CLO allows you to align your pattern measurements with the dimensions of a CLO avatar.

Does the Strain Map account for the specific stretch limits of different fabrics?

Yes, the Strain Map in CLO includes a Fabric Mode that uses each fabric's wearable stretch limit calculated from its physical properties, alongside a Global Mode that applies a uniform scale across all fabrics. Because Fit Maps depend on fabric input accuracy and testing conditions, they act as design aids rather than guarantees of physical comfort or fit.